Stay tuned for updated pics, as I restore this 69' classic!
Click on images to see larger view.
The pics of the exterior and interior were taken in the summer of 2003.
All of the other pics have been taken in the summer of 2004


Prev Page 1 Next
Front view Rear view Left door Right door Left front quarter panel
Right front quarter panel Left rear quarter panel Right rear quarter panel Rear under carriage Engine compartment


The above pics are of the body.


Right side interior Heater and A/C Fuel guage Speedometer, light switch, wiper switch Glove box
Glove box Under dash Heater and A/C box Manual vent pull switch


The above pics are of the interior. More pics coming.

Retired 350 motor Cleaned and painted 350 motor Front view of cleaned and painted 350 motor Motor nearly finished Tranny ready for rebuild
Cleaned and primed 350 TH Other side of cleaned and primed 350 TH


Here are the motor and transmission pics

Engine Compartment without motor Left side view without motor Right side view without motor Front clip off Another view with front clip off
Left side firewall Right side firewall


These are pics of the front clip disassembly

Front view of frame outside Front view of frame inside Rear view of frame outside Rear view of frame inside Left side view of frame
Front Suspension taken off Front Suspension taken off Frame almost ready for POR-15 Frame almost ready for POR-15 Frame almost ready for POR-15


These are pics of the frame. I plan to clean and prep the frame with POR-15 and then top coat with chassis black.

Body lift left side view Body lift right side view


These are pics of the body lift system I used. This way is not for everybody. I had hoped to do this differently, although this way worked well for me and the assembly will be done this way also.

Left side floor pan forward view Left side floor pan rearward view Right side floor pan rearward view Right side floor pan forward view Trunk view, needs to be replaced
Trunk view, needs to be replaced Gas tank


These are pics of the under carriage. As you can see I have a lot of work ahead with this portion of my project.

Inside of radiator support primed Outside of radiator support primed Another view of outside of radiator support primed Radiator support painted


These are pics of the Radiator support

Filler panel primed Filler panel painted


These are pics of the filler panel between the front bumper and front clip

Fender supports primed Fender supports painted


These are pics of the fender supports for the front fenders

Crossmember primed and painted


This is a pic of the crossmember for the transmission

Driveshaft primed Driveshaft painted


These are pics of the driveshaft

Chassis mounts painted


This is a pic of the motor mounts that bolt to the chassis

Radiator support top primed Radiator support top painted


These are pics of the radiator support top

Prev Page 1 Next




Go onto Page 2 for further updated pics of my Chevelle Project


Back to Chevelle page